Series Digital Panel Meters, Counters & Timers
The state of the art
in modular, microprocessor-based digital panel meters, counters,
timers, and large-digit displays. Our Micro Series solves a wide
range of application problems cost-effectively by offering
exceptional accuracy at read rates up to 60/second, a wide choice of
I/O options for data communications and control, plus advanced
programmable features. Available in three digit heights: 0.56", 1.0"
and 5.0". Large digits allow
long-range viewing across a plant floor or outdoor yard.
Timer with 5" digits visible at up to 200 feet (61 m)
Mechanical Specifications, Micro Series
Micro-P & Micro-C:
0.56" (14.2 mm) digit height, red or green LED digits,
standard 96 x
45 mm (1/8 DIN) panel cutout. NEMA-4X rated front panel.
Mighty-1 Series: 1.0" (25.4 mm) digit height, red LED
digits, 183 x 91 mm panel cutout. Readable at up to 40
feet (12 m).
Mighty-5 Series: 5.0" (127 mm) digit height,
red LED digits. Outdoor rated brightness, dimmable for
indoor use. NEMA-4X sealed enclosure measuring 25" wide x 8-5/8" high x 5-5/8" deep. Bracket or bulkhead mounting. Readable at up to 200 feet (61 m).
5-Digit Panel Meters by Application
DC Digital Panel Meters: DC Volts, mV,
Digital Panel Meters: True AC rms Volts, mV, Amps, mA.
Meters: Scalable display for signals such as 0-1 mA, 4-20 mA, 0-10 V.
Process Signal Totalizers: Totalizing for 0-1 mA, 4-20 mA or 0-10 V signals.
& Potentiometer Followers: Sensitivity to ±200 mV full
scale, 4-wire bridge connection.
Microvolt & Load Cell Meters:
Sensitivity to ±20 mV full scale, 4- or 6-wire bridge connection.
Meters: Special capabilities
for weighing applications.
Temperature Meters: Multiple thermocouple & RTD types
the same meter.
Digital 6-Digit Counters & Timers by Application
Frequency & Rate Meter:
Two independent scalable pulse-input channels from
0 Hz to 1 MHz to display frequency, rate, RPM, or flow
Up/Down Totalizer (pulse
input): Two independent scalable pulse-input
channels count up or down to a preset at rates up to
1 MHz. Ideal for turbine flow meters. Scaled rate and total in same instrument.
A+B, A-B, A*B, A/B,
A/B-1 Draw Meter: Arithmetic functions (+, -, /, x) on dual channels
A & B. For example, add or subtract rates from two flow
meters for combined scaled flow or volume. Display ratio of
flow rates, RPM of rollers, or speed of moving belts.
Batch Controller (pulse input):
A low-cost controller with up to three relays for
repetitive fill operations.
Batch Controller (analog input):
Same capabilities as pulse-input batch controller, but
for 0-1 mA, 4-20 mA or 0-10 V process signals.
single-events from 1
µs to 999,999
hours with a timing resolution to
0.2 µs, or
accumulate multiple events.
Time Interval Meter:
Time periodic events from 1 µs to 199.99 s over a
programmed gate time up to 199.99 s with a timing resolution to 0.2 µs.
Phase Angle Meter:
20 updates per second for low frequencies,
such as AC line frequency.
A resolution of 1º, 0.1º or
0.01º is user-selectable.
Duty Cycle Meter:
Displays ON or OFF
period as a percentage of total period over a programmed
gate time from 10 ms to 199.99 s.
Scalable position or rate from quadrature shaft encoder
Serially Driven 6-Digit Remote Display:
Up to 31 displays are individually addressable on one serial
data line. 1/8 DIN version has same
appearance as a digital panel meter or counter.
Micro & Mighty Series Web
Pages Applicable to DPMs, Counters, Timers
linearization: For improved accuracy, extended
measurement ranges, and special applications.
to display and log up to 31 meters on one data line, plus 33 virtual
meters with combinations of meter
Dual setpoint relay
mechanical relays or opto-isolated solid state relays for control and alarm.
Analog output option: 0-20
mA plus 10 Vdc analog outputs, isolated, linearized and scaled to display.
option: Isolated RS232 or
multipoint RS485, Custom ASCII or Modbus protocols.
Low voltage power option: For
operation off 12-34 Vac or
10-48 Vdc from a battery (not available with 5" Mighty-5 Series).
Micro & Mighty Series Documentation
0.56", 1", 5" digits.
0.56", 1", 5" digits.
Scale & Weight
0.56", 1", 5" digits.
Micro-C, Mighty-1C, Mighty-5C Counters & Timers Manual, pre-May 2007.
Micro-C, Mighty-1C, Mighty-5C Counters & Timers Manual, Series B,
Micro-P, Mighty-1, Mighty-5 Meter Manual, pre-May 2007.
Micro-P, Mighty-1, Mighty-5 Meter Manual, Series B, post-May 2007.
Micro-S, Mighty-1S, Mighty-5S
Digital Weight Meter Manual.
Manual: pre-May 2007.
Manual, Series B: post-May 2007.
Communications Manual, Series B: post-May 2007.
Micro Series Pricing
Micro Series Downloadable Software
Please see our
Micro Series Downloadable Files
page for more information.
Series Economical Digital Indicators
for DC voltage, process voltage, or process current signals. All
models are housed in a 1/8 DIN panel-mount case (96
x 45 mm panel cutout)
and feature 0.56" (14.2 mm) bright red LED digits. These
meters allow easy range selection by means of plug-in jumpers, and scaling by
means of potentiometer adjustments. Process signal versions are
scalable to read out directly in engineering units. DIN Series Models EN35V, EN35P and EN35E are 3½
digit (±1,999 count) meters, while models EN45V and EN45P are 4½ digit (±19,999
Pricing & Documentation
Low-Cost Voltmeters & Process Meters
Imported, low-cost meters with 3½ (±1999) or 4½ (±19999)
digits for readout of DC voltage or current, or 3-1/2 process
meters for readout of 4-20 mA signals. Loop-powered LCD models are available with adjustable scaling
and screw terminal connections. Extensive list of selectable features
depending on model:
Data Sheets and Pricing
- Display type:
LED (red or green), LCD (front-lit or back-lit).
Big Digit (0.8"),
Standard (0.56"), or Miniature (0.38".
- Mounting options: bezel, window, flat pack, or snap-in.
- Power options: AC line, 5, 12 or
24 Vdc, or loop-powered.
- Choice of connector options.
4. Older Digital Panel
(still being supported by Electro-Numerics)